JGREDU - John Guest Reduction Fitting - Push Fit Connector for 1/4 Hose to 3/8 inlet.

This is a John Guest fitting for connecting 1/4in hose to drinking water filter housings which have 3/8in tube inlets or 3/8in hardware fittings.

John Guest fittings require no tools to service. The hose tubing is simply pushed into the fitting and then a slight firm "tug" is used to seat the hose into the internal seal. To remove the hose, the collar of the fitting is held pushed in and the hose is gently slid out.

Technical Specifications:
Max. 150 psi @ 75 F - Max. 10 Bar at 20 C
Max. 60 psi @ 140 F - Max. 4 Bar at 60 C
Min. 33 F - 1 C

// Overview // Index // Health // History // Technologies // FAQ // Employment // Training //
// Product Catalog// Travel // Research // Test Results // Orders / Prices // What's New // Contact Us //

Copyright © 1997 H2O International Inc. All rights reserved.

// Title // Overview // Index // Health // History // Technologies // FAQ // Employment // Training //
// Product Catalog// Travel // Research // Test Results // Orders / Prices // What's New // Contact Us //